Product Description: The refrigeration cars on your train keep experiencing electrical power drops, causing employees to become trapped in a pitch-black ice box! You try to put a standard emergency ballast in the cars vaportight T12 fixtures, and within days the battery ruptured. Buddy, you need an extended temperature 2 bulb 1200 lumen emergency ballast.
Bodines B50 features a battery warmer that maintains the internal Ni-Cd battery inside at a nominal 32° fahrenheit even when ambient temperatures dip into the negatives. The case and circuitry are applied with safeguards that earn the emergency battery pack a UL Damp Location rating. For freezing cold environments where moisture and freezing are typical, accept no substitutes.
Features: Ballast Type: Emergency Lamp Wattage: 32-215W Dual voltage 120/277 inputs, 60Hz cycles Operates: One or two 4-8ft T8, T10 or T12 linear fluorescent or 4-pin long CFLs Lumens (at 10-feet): 1200 lm UL 924 listed Min/Max Temp: -4° to 131°F Includes LED charging indicator 5-years full warranty
Application: Once you install Bodines fluorescent emergency battery pack, you'll be saving yourself a lot f time, money and heartache. It includes a sealed LED battery indicator and test switch that is visible from the outside of the fixture. It will flash whenever the battery is in charging mode or if a fault is detected in the charging current.
External Specifications: The ColdPack comes in a polished red metal case that protects the circuitry and qualifies its Damp Location rating. The device can be installed in freezers and inside sealed outdoor cold location fixtures. It has a surprisingly low shipping weight of less than 4 lbs, so it will not weigh down the fixture it is installed to.
Electrical Specifications: Lamp wattage: 17-215W Input Wattage: 14W Input current: 280mA Dual-tap 120 or 277vAC, 60 Hz AC current: 240 mA Initial illumination: 300-700 (depending on lamp) Battery: Hi temp nickel cadmium. 7-10 year lifespan Emergency runtime: 90 minutes Recharge time: 24 hours or less Includes illuminated LED diagnostic switch for UL testing
Compliance: Tested to UL924 standards for Emergency Lighting & Power Equipment CSA C22.2 No. 141 certified (as an option) NEC Installation standards Meets NFPA: 101 Life Safety Code, excerpt 5-9.3 periodic testing standards National Fire Code National Building Code
